Foma P901ITV, User Manual

Page: 374 / 521

367
Other U
s
eful
Function
s
M
u
ltit
ask
■
If a call comes in during a call
If you sign up for Call Waiting Service and activate the service, the ring
tone sounds for an incoming call during a call or during 64K data
communication, and the message appears telling that you can answer the
call after the current call/communication.
To continue the current call:
1. Press or .
p When a voice call comes in during a voice call, the message to the
effect that you can answer the new call does not appear. Follow the
operation in step 2 in the Call Receiving display.
2. ( )
Call rejection . . . . . You can reject a new incoming call and resume
the current call.
Call forwarding . . . You can forward a new incoming call to the
forwarding destination and resume the current
call.
Voice mail . . . . . . . You can connect a new incoming call to the
Voice Mail Center and resume the current call.
To answer a new incoming call:
･
When a video-phone call comes in during video-phone call
When a voice call comes in during voice call
When 64K data communication call arrives during 64K data
communication
1. Press
or .
p When a voice call comes in while you are talking on the phone,
the message to the effect that you can answer the new call does
not appear. Follow the operation in step 2 in the Call Receiving
display.
2. Press .
The current call ends and the Call Receiving display appears. Then
you can answer a new incoming call.
･
Combinations other the above
1.
or
Select the communications to be finished
p
To finish the video-phone call, select “Connecting V-phone”, to
finish the voice call, select “Talking”, and to finish 64K data
communication, select “Connected data”, respectively.
p
You can also press and hold for at least one second to
select the communications to be finished.
2. Press .
The current call ends and the Call Receiving display appears. Then
you can answer a new incoming call.
Information
p
Incoming calls are rejected when a video-phone is connected,
remote observation is activated, during call hold, or while Record
Message is working. The “Missed call” icon appears when the current
call ends, and the call is stored in Received Calls. (The “Missed call”
icon might not appear and the received call record might not be kept
depending on the contracts and setting for Voice Mail, Call Waiting,
and Call Forwarding Services.)
p
If a call comes in during a video-phone call, the moving image,
i-motion movie or Flash movie set as the image for incoming calls is
not displayed.
p
If a call comes in during a video-phone call, a “Pre-installed”
substitutive image is sent to the other party of the current call.
p If a call comes in during a video-phone call, the vibrator does not work.
p
While the digital TV (including Book Program and Program Guide
i-
α
ppli) or analog TV is activated, you cannot answer following
incoming calls during a call:
・
Incoming video-phone calls during a voice call
・
Incoming voice calls during a video-phone call
To reject a newly incoming call, select “Call rejection” from the
Function menu.
The FOMA phone supports “Multitask” that enables you
to use multiple functions at the same time such as menu
functions (see page 35).
By combining Multiaccess and Multitask, you can use
following functions simultaneously (see page 469 for
the combination patterns of Multitask):
You can use maximum three functions and a voice or
video-phone call simultaneously.
Mail Group . . . . . i-mode mail and SMS functions
i-mode Group . . menu functions inside “i-mode group” on the Main
menu
Setting Group . . menu functions inside “Setting group” on the Main
menu
Tool Group. . . . . menu functions inside “Tool group” on the Main
menu
Other functions not in the groups
. . . . . . . . . . . . . . Voice call, video-phone call, 64K data
communication, etc.
1
When a function is running
2
Start another function.
Multitask
Multitask
< >
■
During Multitask
Start Another Function
i-mode Group
Tool Group
Mail Group
Setting Group
The groups in use are
displayed enclosed with the
frame.
When a function in the
Tool group is running