Foma P901ITV, User Manual

Page: 65 / 521

58
Making
Call
s
/Rec
eivi
ng Cal
ls
Swi
tch
ing
f
rom
a Voi
ce Call
to
Video
-phon
e Cal
l
You (caller) can switch from a voice call to a video-phone call during a call.
When the other party’s phone has a function to switch between the calls, “
” is displayed on your
phone and you can switch from the voice call to video-phone call. (This function is available for the
mobile phones that can switch between a voice call and a video-phone call.)
1
During a voice call ( ) Change
p When you select the image to be sent to the other party, select “Select image”. Go to step 2 on page 91.
p
When “Cancel” is selected, the FOMA phone cancels switching and returns to the voice call.
p
While switching, the “Changing” display appears and the voice guidance to that effect is played back.
Switching from a Voice Call to Video-phone Call
Information
p
You can switch from a voice call to a video-phone call repeatedly.
p When i-mode or packet communication is in progress, the communication is disconnected and the voice call is switched to the
video-phone call. With packet communication, a confirmation display appears asking whether to disconnect the communication. Select
“YES”.
p
When packet communication is in progress at the other end, the message to the effect that the communication cannot be switched is
displayed and the voice call continues without switching to the video-phone call.
p You cannot switch from the voice call to the video-phone call while “Multi calling” is displayed during the call if you have signed up for
Call Waiting Service.
p It takes about five seconds to switch. Switching may take a longer time depending on the radio wave conditions.
p Depending on how the caller’s phone is working or on the radio wave conditions, switching from a voice call to video-phone call may fail
and the connection may be cut off.
p
If you switch between the voice call and video-phone call during a call, the call duration and call cost are counted respectively for the
calls. You are not charged while “Changing” is displayed.
p You cannot switch between the video-phone call and voice call unless “Indicate V-phone” is set to “Activate” at the other end. See
page 91 for “Indicate V-phone”.
p
Even if you switch from a voice call to video-phone call when Hands-free is on, the Hands-free is not deactivated. You cannot set
Hands-free to ON or OFF while “Changing” is displayed.
p An alarm for “Quality alarm” and “Reconnect control” does not sound during switching.
p See page 83 for switching from a video-phone call to voice call.