Foma P901ITV, User Manual

Page: 399 / 521

392
Networ
k
Ser
v
ic
e
Remot
e Access
You can select whether to remote-access Voice Mail
Service (see page 384) or Call Forwarding Service (see
page 387) from other phones such as payphones in
addition to the FOMA phone.
1
Remote access
Do the following operations.
In addition to the currently used phone number (basic
contract number), you can use additional number 1 and
2.
You can register additional numbers.
1
Multi number Number setting
Select an additional number
p Select the registered phone number to check the registered name
and phone number.
2
Enter a registration name
Enter a phone number
p You can enter up to 8 full-pitch or 16 half-pitch characters for a name.
Information
p You can set and confirm this setting from the FOMA phone with your
own UIM inserted. You cannot remote-access the setting from ordinary
phones, payphones, and other mobile phones.
p When you sign up for Voice Mail Service (see page 384) or Call
Forwarding Service (see page 387), this function is set to “Activate”.
Remote Access
Setting Remote Access
< >
Item Operations
Activate YES
Deactivate YES
Check setting You can check the setting contents of Remote
Access Service.
p After checking, press .
Information
p You can set and confirm this setting from the FOMA phone with your
own UIM inserted. You cannot remote-access the setting from ordinary
phones, payphones, and other mobile phones.
p When you sign up for Voice Mail Service (see page 384) or Call
Forwarding Service (see page 387), this function is set to “Deactivate”.
Multi Number
Setting Additional Number
Phone Number Registration
< >
Information
p When you insert another UIM, the Multi Number settings (name, phone
number, ring tone, etc.) are erased. Register them again.
p
See page 65 for the display of receiving a call with the additional phone
number.
1
While an additional number is displayed
( ) Do the following operations.
By switching this setting, you can make all calls from a
specified phone number.
1
Multi number Set multi number
Basic Number . . . . . . . . . . . . Dials by the contracted phone
number.
Additional Number 1 / 2 . . . . Dials by an additional phone
number. When the registration
name is changed, each
registration name is displayed.
2
YES
Before making a call, you can select a phone number to
be notified to the other party from a Function menu, and
then make a call.
1
Enter a phone number,
or bring up the detailed display of a
Phonebook entry, redial item, dialed call
record, or received call record.
2
( ) Multi number
Select a phone number
p To cancel the additional phone number, select “Cancel prefix” or
“Cancel number”.
p When you are not signed in Multi-number, your basic contract phone
number is used for dialing even if you select an additional number.
You can check a phone number set for “Set multi number”.
1
Multi number Check setting
p When you finish checking, press .
Function Menu while Additional Number
is Displayed
Function menu Operations
Edit Go to step 2 of “Phone Number Registration” on
page 392.
p You can edit also by pressing ( ).
Delete this YES
Delete all YES
Set Multi Number
Information
p When you make a call from Redial, Dialed Calls or Receive Calls, the
phone number that was previously dialed/received is used for dialing.
Selecting Own Phone Number when
Making a Call
Information
p If you select “Contract number” or “Assist number 1 to 2”, “
:
590
＃
”,
“
:
591
＃
”, or “
:
592
＃
” is added after the phone numbers.
Checking Multi Number Setting