Foma P901ITV, User Manual

Page: 410 / 521

403
Data
Communi
ca
tio
n
Communi
cat
ion
Set
ting by FOMA
PC
Setu
p
Sof
tw
are
Communication Setting by FOMA PC
Setup Software
STEP1 Install Software
Install the “FOMA PC setup software”.
See page 403 for installation.
If the old-version “FOMA PC setup software” is already installed,
uninstall it before installing “FOMA PC setup software”. If the
old-version “FOMA PC setup software” is installed, you cannot install
the “FOMA PC setup software”. The “FOMA PC setup software” is
applicable to all the FOMA phones that support data communication.
STEP2 Prepare for Setup
Prepare for setup.
Before setup, confirm that the FOMA phone is connected to your
personal computer and normally recognized by the personal
computer. See page 398 for how to connect the FOMA USB Cable
(option). If the FOMA phone is not normally recognized by the
personal computer, you cannot perform settings and communication.
See page 401 for confirming whether the FOMA phone is normally
recognized by the personal computer.
See page 399 through page 402 for how to install the P901iTV
communication setup files.
STEP3 Setting Operation
Carry out the appropriate setting for the
communication you use.
Setting the packet communication from “Easy Setting”.
When using mopera U or mopera as an access point
.......................................................................................................
P.406
When using a provider other than mopera U or mopera as an
access point ............................................................................P.407
Setting the 64K data communication from “Easy Setting”.
When using mopera U or mopera as an access point
.......................................................................................................
P.409
When using a provider other than mopera U or mopera as
an access point .......................................................................P.409
See page 412 for optimizing the packet communication performance
using “W-TCP Setup”.
See page 413 for setting “access point name (APN)”.
STEP4 Connection
Connect to the Internet.
To connect the FOMA phone to a personal computer
and perform the packet communication or 64K data
communication, you need to configure various settings
related to the communication. Using the FOMA PC setup
software, you can easily carry out the settings below. If
required, you can set the packet communication and
64K data communication without using the FOMA PC
setup software. (See page 414 and page 426)
The “FOMA PC setup software” is applicable to all
FOMA phones that support data communication.
To connect the FOMA phone to your personal computer
and perform packet communication or 64K data
communication, you need to configure various settings
for the communication.
Using the FOMA PC setup software, you can easily set
up dial-up, W-TCP, and access point name (APN).
p
When you install the “FOMA PC setup software” on Windows
®
XP or
Windows
®
2000 Professional, make sure that you have the network
administrator rights or personal computer administrator rights. If
user without the administrator rights performs installation, an error
occurs. Contact each personal computer maker or Microsoft
Corporation for setting the personal computer administrator rights.
FOMA PC Setup Software
■
Easy setting
You can “create dial-up setting for FOMA data communication” according
to the guide, and also easily carry out “W-TCP setup” and so on.
■
W-TCP setup
Before using “FOMA packet communication”, optimize communication
settings in your personal computer.
To maximize the communication performance, you need to optimize
communication settings using W-TCP setup.
Do not optimize using “W-TCP setup”, when you connect using 64K data
communication.
■
Access point name (APN) setting
You can set an access point name (APN) required for packet
communication.
The FOMA packet communication does not use an ordinary phone
number as an access point unlike the 64K data communication.
You need to register an access point name (APN) in the FOMA phone in
advance, and specify the registration number (cid) in the access point
number field for connection.
By the default, “mopera.ne.jp”, the access point name (APN) of mopera,
is registered in cid
※
1, and “mopera.net”, that of mopera U, is registered
in cid
※
3.
To connect to another service provider or Intranet LAN, however, you
need to set the access point name (APN).
※
“cid” is the abbreviation of “Context Identifier”, the number for storing
the packet communication access point (APN) to the FOMA phone.
Information
p When the old-version of FOMA PC setup software (version 1.00,
hereafter referred to old-version FOMA PC setup software) is installed,
uninstall it before installing this “FOMA PC setup software” (version
2.00). See page 405 for how to check the version information.
Installing FOMA PC Setup Software