Flavor Burst CTP 80CBB, Equipment, Maintenance And Operations Manual

Page: 54 / 80

53
Draw Switch Options
When the draw spout is activated, the draw
switch relays the signal to the Flavor Burst
®
system, telling it to activate the pumps and
syrups as product is drawn from the spout. The
CTP 80CBB system comes with a few switch
options and more are available from your
distributor.
Once installed, the switch will be recognized
and activated by the Color Touch Panel through
the Equipment Setup Wizard program later in
this manual.
Flavor Burst highly recommends using an
integrated (internal) switch to power the
CTP 80CBB system.
However, the correct
integrated switch for your freezer depends on
the freezer model as well as what product is
being used (shake vs. slush). These switches
may not be included with your system. If the
installer has the correct integrated switch on
hand, install it using the instruction sheets
included with each. If an integrated switch is
not available, use one of the external switches
included with this system in the Spare Parts Kit.
Use the chart below to determine which draw
switch you need. Contact your local distributor if
you need further information.
FREEZER MODEL - PRODUCT
SWITCH KIT /
MOUNT STYLE
All Standard Beverage -
Shake & Slush ELE 510
external & internal
Taylor 430
- Shake / Slush ELE 474-NCL
internal
(not incl.)
Taylor 428 / 432
- Slush ELE 518
internal
(not incl.)
Taylor 428 / 432
- Shake ELE 526
Internal
(not incl.)
Taylor C708-SHAKE
with built-in switch port
- Shake only ELE 525M
direct connect
extension
Taylor C708-SHAKE
if built-in switch port stops
working
- Shake only ELE 700C
draw handle
(for trouble-
shooting
purposes, or as a
temporary switch)
Connecting to the Internal Switch with the
ELE 525M Extension
1. For freezers that have an integrated switch
already built into the freezer, insert one end
of the switch extension into the integrated
switch port on the freezer. Connect the
other end of the extension to the switch port
on the underside of the Touch Panel.
NOTE: THE SWITCH PORT TO THE
OUTSIDE OF THE PANEL IS ALSO A VALID
PORT. YOU WILL ACTIVATE THE PORT
AND SWITCH YOU USE WHEN YOU GO
THROUGH THE EQUIPMENT SETUP
WIZARD PROGRAM ON YOUR COLOR
TOUCH PANEL LATER.