Flavor Burst CTP 80CBB, Equipment, Maintenance And Operations Manual

Page: 20 / 80

19
Electronic Parts and Connections (See Figure 6)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
1 ELE 906 FLAVOR 10 COLOR TOUCH PANEL 1 Control system for the unit.
2 MIS 3214
TOUCH PANEL MOUNTING
BRACKET ASSEMBLY
1 Secures the Touch Panel to the freezer.
2A MIS 3214A TOUCH PANEL MOUNTING PLATE 1 ea.
Attaches the Touch Panel to the anchor
bracket.
2B MIS 3214B MOUNTING ANCHOR BRACKET 1 ea. Allows the bracket to be angled up or down.
2C MIS 3214C MOUNTING BASE PLATE 1 ea.
Creates a mounting base for the bracket
assembly.
2D FAS 2170 M4 X 8 PHILLIPS SCREW 4 ea.
Secures the mounting plate to the Touch
Panel.
2E FAS 2174 1/4 - 20 NYLON LOCK NUT S.S. 2 ea.
Secures the anchor bracket in a fixed
position.
2F MIS 3076 ADHESIVE PAD 1 ea. Secures the mounting bracket to the freezer.
2G FAS 2172 1/4-20 X 1/2 HEX BOLT 2 ea.
Hinges Touch Panel plate and anchor
bracket.
2H FAS 2023 MOUNTING BRACKET KNOB 4 ea. Secures anchor bracket to the base plate.
2I FAS 2171 M4 LOCK WASHER 4 ea.
Secures connection between screw and
plate.
2J FAS 2173 FLAT WASHER 18-8 S.S. 2 ea. Secures connection between bolt and nut.
3 MIS 3004
CTP ETHERNET CABLE PLATE
1
Converts the touchscreen cable hole to an
ethernet cable hole.
4 MIS 3026S
TOUCH PANEL CABLE CASING
1
Conceals and protects the Touch Panel
cable, as well as attaches it to the freezer.
5 ELE 525M
MALE TO MALE 48” SWITCH
EXTENSION
1 Connects Touch Panel to the freezer switch.
6 CAB 137-A ELECTRONICS COVER 1
Protects and covers electronics
microprocessor.
7 FAS 2014 8-32 X 1/2" PAN HEAD 16 Secures various parts within the top of unit.
8 MIS 3150 FLAVOR BURST LOGO DECALS 1 Displays Flavor Burst trademark logo.
9 CAB 156 CONNECTOR SHIELD 1 Protects power cables from liquids.
10 ELE 485CTP 120V POWER ENTRANCE MODULE 1
Provides a power connection to the outside
of the cabinet.
11 ELE 932
PUMP & SANITIZER CABLE
HARNESS
1 Provides power to syrup & sanitizer pumps.
12 ELE 933 POWER SUPPLY JUMPER CABLE 1
Connects the power supply to the electronics
board.
13 ELE 931 EXTERNAL ROTOR CABLE 1
Connects the Drive Motor to the back of the
cabinet.
14 INJ 330HSB
BLENDING MOTOR ASSEMBLY –
7500 RPM
1 Supplies power to Motor which turns gears.
15 ELE 911 ELECTRONICS BOARD 1 Provides power to the system.
16 FAS 2024 8-32 X 1/4 PAN HEAD SCREW 4 Secures power supply to the base panel.
17 FAS 2035 8-32 NUTS - EXT. LOCK WASHER 4
Secures ground wire to screw and
Panel and the Electronics Box to the panel.
18 FAS 2042 4/40 LOCK NUT 4 Secures the Ethernet plate and screws.