FISCHER FISCHERSCOPE X-RAY 5000 Series, Operator'S Manual

Page: 81 / 188

List of Task Commands Task programming
FISCHERSCOPE
®
X-RAY 81
p62V2Sets variable 2 = V3
p63V3Sets variable 3 = V3
p71L V1 = V1 -1, if V1 > 0 GOTO label L
p72L V2 = V2 -1, if V2 > 0 GOTO label L
p73L V3 = V3 -1, if V3 > 0 GOTO label L
Accessories
f42 S Creates a text box on the screen (Text = S)
Returns TRUE or FALSE (Button [OK] or [Cancel])
f50 - Starts a reference measurement
f64 N Sets a delay (pause) of N sec.
f90 - Closes a window if not the main window
(If no window can be closed then return code = ERROR)
f91 - Reset X-RAY, new PC-Communication, new HV
control etc.
p98- Singlestep mode: Task is carried out by single steps
following F4 key print
p99- Singlestep mode (p98) OFF
.. depending on the last readings (tolerance limits) ...
p80S,LS symbolizes a logical relation acc. to the table given
below. In case of TRUE (the respective relation is
fulfilled) the task steps to label L.
... depending on the last measurement data ... (specification
limit)
p80S,LS symbolizes a logical correlation according to the
table below.
In case of TRUE (the respective relationship is fulfilled), the task
will jump to label L.
S Meaning
(“i” represents the number of the measurement data column)
> KiReading no. i (i=1,2,3) > USL
< KiReading no. i (i=1,2,3) < LSL
> KXminimum 1 reading is > USL
< KXminimum 1 reading is < LSL
?Ki Reading no. i (i=1,2,3) is not measurable