FISCHER FISCHERSCOPE X-RAY 5000 Series, Operator'S Manual

Page: 159 / 188

FISCHERSCOPE
®
X-RAY 5000 Series 159
General Specification
Intended use Energy dispersive x-ray fluorescence measuring system (EDXRF) to analyze and
measure coatings and layer systems continuously in production processes.
Element range Sodium Na (11) to Uranium U (92) if measured in vacuum
Chlorine Cl (17) to Uranium U (92) if measured in the atmosphere
Features
Calibration Quick and easy with a master standard directly in the production process
Remote control Via programmed tasks or via various data interfaces
Data Interface RS232, Command files, OLE automation, TCP/IP, PROFIBUS and PROFINET via
OPC mainly with SPS type SIMATIC, others on request
X-Ray Source
X-ray tube Microfocus tungsten tube with berylium window, other tubes on request
High voltage Three steps: 10 kV, 40 kV, 50 kV
Aperture (Collimator) Fixed, adapted to the particular application
X-Ray Detection
X-ray detector Peltier-cooled silicon-drift-detector (SDD)
Resolution
(fwhm for Mn-K
α
)
≤ 140 eV
Signal processor Digital pulse processor
Distance compensation ± 3 mm (118 mils) for measurements on glass substrates, with specific applications on
glass substrates up to ± 5 mm (197 mils)
Measuring distance 60 – 100 mm (2.4 – 3.9 in), other distances on request
Electrical data
Power supply AC 115 V or AC 230 V 50 / 60 Hz
Power consumption max. 100 W (without evaluation PC)
Protection class IP50
Environmental Conditions
5100 5400
Measuring environment Atmosphere Vacuum
Maximum sample surface
Temperature ≤ 40 °C (104 °F) ≤ 400 °C (752 °F)
Cooling – Water cooling, e. g. with
water temperature 20 °C (68 °F),
water pressure 5 – 9 bar, flow rate 6 l/min
Operating temperature 0 °C – 40 °C (32 °F – 104 °F) around the housing
Storage temperature 0 °C – 50 °C (32 °F – 122 °F)
Admissible air humidity ≤ 95%, non- condensing
Dimensions
5100 5400
Weight 37 kg (82 lb) 47 kg (104 lb)
Flange dimensions ISO 250F
Outside W x D x H 236 x 350 x 370 mm (9.3 x 13.8 x 14.6 in)