manualshive.com logo in svg

FISCHER FISCHERSCOPE X-RAY 5000 Series, Operator'S Manual, Page: 132 / 188

Share
Download
FISCHER FISCHERSCOPE X-RAY 5000 Series Operator'S Manual Download Page 132

132

FISCHERSCOPE

®

 X-RAY

Measurement Data Export

 Setting up an Export Template

Table 17-6: Explanation of the elements

Variable

Explanation

@CAL

Contains the product name.

@TAB

A tabulator will be inserted.

#

The character # will be displayed.

@PRN

Contains the product number.

@CRX

A carriage return will be inserted.

Operator

The text 

Operator

 will be inserted.

@LFX

A line feed will be inserted.

@EL

Contains the name of the result channel (element, coating thickness, ppm 
etc. ), must always be supplemented with the number of the respective 
channel, e. g. @EL1

@DM

Contains the unit of the result channel (mils, nm, % etc.), must always be 
supplemented with the number of the respective channel, e. g. @DM1

@END

Ends the template

Summary of Contents for FISCHERSCOPE X-RAY 5000 Series





























































































































































































Reviews:

No comments