FISCHER FISCHERSCOPE X-RAY 5000 Series, Operator'S Manual

Page: 30 / 188

30 FISCHERSCOPE
®
X-RAY
User Interface of the WinFTM Software Status Bar
5.5 Status Bar
The status bar is located at the bottom of the WinFTM window and displays the following:
5.6 mq Value
The mq value (measurement quality value) is a quality factor of the measurement value.
It is displayed in the status bar.
The mq value is a measure for the agreement of the measured spectrum with the theo-
retical spectrum. The mq value is an indication for the confidence level and the trueness
of the measurement value. The smaller the mq-value of a reading is, the more correct is
the measurement result. The optimal value for mq is 0.
General recommendation:
Display Explanation
Help text If you hover with the mouse pointer over a command button, addi-
tional help text will be displayed here.
Measurement
distance Measurement distance between the specimen measurement spot
and collimator minus 15 mm, when the video image is focused.
XYZ coordi-
nates
1
1) only available at instruments equipped with motor-driven measuring stage
Coordinates of the current position of the measurement stage.
mq value Quality factor of the last measurement value. The mq value is a
measure for the agreement of the measured spectrum with the theo-
retical spectrum, see Chap 5.6 on Page 30.
CAP The caps lock key of the computer keyboard was pressed.
NUM The number pad of the keyboard is activated.
mq = 0 – 5 The measurement is OK.
mq > 5 The measurement must be discarded.
Operator‘s name
Help text
Measurement distance
XYZ coordinates
mq value