FISCHER FISCHERSCOPE X-RAY 5000 Series, Operator'S Manual

Page: 130 / 188

130 FISCHERSCOPE
®
X-RAY
Measurement Data Export Setting up an Export Template
To add a variable to your template:
1. Set the cursor to the position in your template, where the variable shall be inserted.
2. Highlight the variable in the window at the right.
3. Click
17.3.1 The Syntax of the Default Template
To explain the general principle for setting up an export template and the effect of the
variables, the syntax of the default export template is described in this section.
The default export template consists of three parts:

Template for single readings

Template for block statistics

Template for block statistics
General rules for export templates:

An export template can have any chosen length.

An export template must be defined in one row. Carriage returns and line feeds must
be entered by using the variables @CRX and @LFX, not by pressing the enter key.
Template for single readings
Syntax:
@NBR@TAB@PRF@TAB@VA1@TAB@VA2@TAB@VA3@TAB ...
@VA20@CRX@LFX@END
NOTE:
For more clarity the syntax is shown here in two lines. In the window Defi-
nition of Export Template the template must be written in one line to avoid
unwanted carriage returns and line feeds.
Table 17-4: Explanation of the elements
Variable Explanation
@NBR Contains the number of the reading
@TAB A tabulator will be inserted.
@PRF Contains the nam of the operator
@VA Contains the value of the reading, must always be supplemented with the
number of the respective reading, e. g. @VA1
@CRX A carriage return will be inserted.
@LFX A line feed will be inserted.
@END Ends the template