FISCHER FISCHERSCOPE X-RAY 5000 Series, Operator'S Manual

Page: 29 / 188

FISCHERSCOPE
®
X-RAY 29
Measurement Value Field User Interface of the WinFTM Software
You can display or hide the result channels defined within the DefMA according to your
needs.
1. In the WinFTM main menu, click
.
The window Modify product appears.
2. Select the tab Presentation .
3. In the area Display, check or uncheck the result channel to be displayed.
To change the display modes (Large numbers, Listing or SPC presentation)
1. In the WinFTM main menu, click .
The window Modify product appears.
2. Select the tab Presentation .
3. In the area Presentation, select the display mode to Large numbers , Listing or SPC .
SPC can only be selected, if the Block definition is set to fix.
To change the display resolution
1. In the WinFTM main menu, click .
The window Modify product appears.
2. Select the tab Product .
3. In the field Display Resolution, select a resolution.
To enter tolerance limits
1. In the WinFTM main menu, click .
The window Modify product appears.
2. Select the tab Presentation .
3. In the area Tolerance limits, check activated .
4. Within the area Tolerance limits, choose the result channels, for which tolerance limits
shall be displayed.
5. In the columns LSL (Lower Specification Limit) and USL (Upper Specification Limit),
enter the tolerance values.
To enter the name of the operator
► In the WinFTM main menu, select Evaluation > Order No. / Operator ... .