FISCHER FISCHERSCOPE X-RAY 5000 Series, Operator'S Manual

Page: 80 / 188

Task programming List of Task Commands
80 FISCHERSCOPE
®
X-RAY
f11 A,XLoads - from of directory A - product no. X
f12 B Loads - from current directory - product with
designation B
f13 A,BLoads - from directory A - product with
designation B
f15 N Loads Stabi Test product no. N
f16 S Loads Stabi Test product S
Block handling
f20 S Sets Order No.= S
f21 S Sets Lot No.= S
f22 S Sets Operator = S
f25 - Closes block
Evaluation
p01- Opens block report
p02- Print key (in block report)
p05- Closes block report
p10- Deletes last block
p15 -Deletes last measurement
f62 - Online export ON
f63 - Online export OFF
Labels & Loops
The term "jump address" has the same meaning like the term
"label".
A jump is an exit from the continuous program cycle due to a jump
command. The program cycle is then continued at a different place,
that is, at the jump address. Only one jump address with the same
name may be entered in the Task.
A loop in the program cycle is created if the jump address points to
a program step that is ahead of the jump command more towards
the beginning of the program.
p51L Sets a label L
p52L GO TO L
p53L if Error in last command: GOTO label L
p61V1Sets variable 1 = V1