FISCHER FISCHERSCOPE X-RAY 5000 Series, Operator'S Manual

Page: 65 / 188

Variables Available for the final Evaluation Setting Up the Print Form Using PDM
FISCHERSCOPE
®
X-RAY 65
@ANBOrder number of the last block of the selected blocks
or the information that has been entered into the first entry
field of the dialog window “Order No./ Operator”.
@BM1Lot number of the last block of the selected blocks
or the information that has been entered into the second entry
field of the dialog window “Order No./ Operator”.
@EDBNumber of the last block of the selected blocks .
@EDTDate of the last block of the selected blocks .
@ETMTime of the last block of the selected blocks .
@HG1Histogram of all single readings of the selected blocks
in the current product.
See also @WN1.
Regarding the numerals
1; 2; 3 ... after certain
variables:
A measurement consists
of one or more single
readings (“channels”) that
are identified by consecu-
tive numbers (1,2,3).
Example “Dual coating
measurement”
Top coating thickness = 1
Intermediate coating
thickness = 2
@OE1Upper control limit UCL(d) of the mean values of an
SPC chart.
@OG1Upper specification limit USL (upper tolerance) for the
presentation and computation of the upper limit
violations in the selected blocks of the current product.
@OR1Upper control limit UCL(s) or UCL(R) of the standard
deviation s or the range R of an SPC chart.
@P<1Percentage of single readings in the selected blocks of the
current product that fall below the lower specification limit
LSL.
@P>1Percentage of single readings in the selected blocks of the
current product that exceed the upper specification limit
USL.
@PRFOperator of the last block of the selected blocks
or the information entered into the third entry field of the
dialog window “Order No./ Operator”.
@RG1Range = Difference between the largest (maximum) and
smallest (minimum) single readings of the selected blocks