Festo DLP-VSE Series, Manual

Page: 67 / 112

4. Commissioning
4-13
Festo P.BE-DLP-VSE-... en 0206a
Access the mask “Configure”:
1. Double-click with the left-hand mouse key or once with
the right-hand key on the icon of the Festo Local control
unit.
2. Select “Configure” from the menu which appears.
The mask “Configure” appears (Fig. 4/6).
The program has already entered the DP identifier for the 4
inputs and outputs of the Local control unit automatically in
this mask.
If you work in the configuration “with measurement bus” (see
chapter 3.3.2),
S
enter the identifiers for the angle measurement. 1AE
(50hex)
S
Confirm with OK.
Fig. 4/6: Configuration with COM PROFIBUS (example: configuration “with measurement
bus”)