Festo DLP-VSE Series, Manual

Page: 62 / 112

4. Commissioning
4-8
Festo P.BE-DLP-VSE-... en 0206a
SYNC With this function all the outputs of the Local control unit
can be “frozen”. As a consequence, the Local control unit no
longer reacts to modifications of the output image in the
master. The following SYNC command causes the output
image of the master to be updated.
Return to normal operation with the UNSYNC command.
Module consistency
The Local control unit supports the following variants of mod-
ule consistency:
– via the selected format (word)
The configuration
The position of the DIL switch for the configuration is relevant
for the required DP identifier of the Local control unit (see
chapter 3.2.1)
DP identifier Comment
1 8DX 8 digital inputs and outputs
(4 used)
Example 1: Local control unit in the configuration “without
measurement bus”
DP identifier Comment
1 8DX 8 digital inputs and outputs
(4 used)
2 1AE analogue measured value
Example 2: Local control unit in the configuration “with
measurement bus”