Festo DLP-VSE Series, Manual

Page: 66 / 112

4. Commissioning
4-12
Festo P.BE-DLP-VSE-... en 0206a
4. The entry mask “Slave parameters”
4
will appear. Select
the station type “FESTO VORORT / LOCAL” and confirm
this with OK.
The icon of the Festo Local control unit
5
will appear under
the graphic of the master. The icon will appear if you have
copied the Bitmap file correctly (see step 3 of the prepara-
tions).
Station selection is then completed.
COM PROFIBUS configuration
Prerequirements:
– the Device data base must be in the directory of your PC/
programmer.
– the mask “Bus parameter” must be processed (bus pro-
file, baud rate)
– the PROFIBUS address must be assigned (see above)
– the station type “FESTO VORORT / LOCAL” must be se-
lected (see above)