Festo DLP-VSE Series, Manual

Page: 22 / 112

2. Fitting
2-2
Festo P.BE-DLP-VSE-... en 0206a
Please note
Make sure that the seal in the cross-section profile is not
damaged.
1 2 3
4
1
Protective foil
2 Sliding block
3
End cover
4 Integrated seal
Fig. 2/5: Preparations for fastening with sliding blocks (view of supply/exhaust side of
Local control unit)
S
Fitting the Local control unit onto the wall (Fig. 2/6)
1. Screw the fastening kit (DLP-VSE-BP, must be ordered
separately) to the sliding blocks. Screw 4 screws into
each of the fastening plates. The tightening torque is 1.5
Nm (± 20%).
2. Fasten the Local control unit to the wall.