Festo DLP-VSE Series, Manual

Page: 26 / 112

3. Installation
3-2
Festo P.BE-DLP-VSE-... en 0206a
3.1 Connecting the pneumatic components
Please note
Place a suitable seal under each screw connector or si-
lencer in order to avoid leakage. By greasing the seals
slightly you can increase the sealing effect. If elbow screw
connectors or multiple distributors are used, the airflow
will be reduced slightly.
3.1.1 Tubing variants
Connecting 1. Push the tubing as far as possible over or into the tube
connection of the screw connector.
2. Tighten locking screw 2 or, where applicable, pull locking
ring 4 over the tube connection.
3. For reasons of clarity, group the tubing together with
– tube straps or
– multiple hose holders
1 Quick connectors
2
Locking screw
3 Quickstar con-
nection
4 Locking ring
1 2
3 4
Fig. 3/9: Connecting the tubing