Festo DLP-VSE Series, Manual

Page: 44 / 112

3. Installation
3-20
Festo P.BE-DLP-VSE-... en 0206a
Connecting the field bus
Please note
Please note that only the Festo plug complies with protec-
tion class IP 65.
Use plastic conduit-thread connectors for fitting the field
bus plug. This creates better resistance to environmental
influences.
There is a 9-pin sub-D socket on the Local control unit for
connecting it to the field bus. This connection serves for the
supply cable as well as for the continuing field bus cable. You
can connect the Local control unit with the sub-D plug from
Festo (part no. 18529).
Pin Festo sub-D plug (IP65) PROFIBUS-DP Designation
1
2
3
4
5
6
7
8
9
Housing
B
A
Cable clip
n.c.
n.c.
RxD/TxD-P
CNTR-P
1)
DGND
VP
n.c.
RxD/TxD-N
n.c.
Screening
not connected
not connected
Receive/send data P
Repeater control signal
Data reference potential (M5V)
Supply voltage positive (P5V)
not connected
Receive/send data N
not connected
Connection to housing
1)
The repeater control signal CNTR-P is in the form of a TTL signal.
Fig. 3/24: Pin assignment of the field bus interface (view of socket)