Page 92
VIVO Monitor
VIVO Monitor
Parameters in Alarm Settings: It is possible to confi gure the following parameters in the Sensor Module:
-
Address.
Address of the Sensor Module from 0 to 3. [0] by default.
-
Zone.
A Sensor Module allows for the management of up to 16 zones. A maximum of 4 Sensor Modules
(Sensor 1, Sensor 2, Sensor 3 and Sensor 4) can be managed.
-
Name.
Description of name of the zone (maximum 16 characters).
-
Type.
Type of zone:
* 24/7 zone: 24 hours, 7 days a week. Sensors that are always armed, such as smoke, gas,
water, etc.
* Night Zone. Perimeter control sensors and/or movement sensors.
* Out Zone. All types of sensor.
-
Mode.
Operating mode of the Zone: NO (Normally Open) / NC (normally Closed). The fi rst eight zones will be
NC (Normally Closed) and the other 8 zones can be confi gured as required, either NC or NO (as of zone 9).
-
I/O.
Zone activation mode: I (Immediate) / D (Delayed).
Note: The alarm system can be confi gured in 3 modes:
- Home: Only the 24/7 zones are armed.
- Night: The 24/7 zones and the Night zones are armed.
- Out:All zones are armed.
To confi gure the different parameters, press them and the available options will be displayed.
Once the parameters have been entered, press to validate
- Note: To go back to the Start Menu, press the intui-
tive icons displayed on the monitor - such as arrows
or icons corresponding to the current screen - by
pressing the MENU button or after a period of time,
as the monitor returns to stand-by (screen off) after
30 seconds.
