Page 67
VIVO Monitor
VIVO Monitor
residents (Tenants) so that, when one of them shows their user device to the Outdoor Panel
(proximity modules, fi ngerprint, radio-frequency
or alphanumeric code)
, the system activates
the corresponding relay on the Panel and the relays that enable the corresponding button for
their Floor and any additional fl oors to which this person has access. After a pre-set period
of time, the buttons are once again disabled.
Setting Lift Parameters.
The Lift parameters are set from the Property Management Station.
Press the
Lift Control
icon to activate up to 3 relays
(depends on the installation/confi guration provided
by the installer). The relay must be in the same Block
as the Monitor. This relay will normally be used to
send the lift to the corresponding fl oor.
The monitor screen indicates that the action has
been carried out.
From the
Installer
Menu go to:
Lift Settings.
The default user name and password for the Installer PMS are:
- User name:
Installer
- Password:
123
From the
Administrator or Installer
Menu go to:
-
Lifts
-
Address Book
The default user name and password for the Administrator PMS is:
- User name:
admin
- Password:
123
