Page 74
VIVO Monitor
VIVO Monitor
Address Book.
This table defi nes the parameters for Tenants. Depending on these parameters and following
the programming of Lift Control, tenants can perform the functions defi ned in Lift Control.
- Lift Control from the monitor.
- Lift Control from the Outdoor Panel for visitors.
- Lift Control from Access Control Reader.
Press
Add
to open a screen where the data to allow for these functions to be operative must be entered.
The parameters in Address Book are:
-
Name.
Tenant's name.
-
Additional.
Additional information. This information will be displayed on the Outdoor Panel in the following
manner:
* As additional information for each user, if the option of displaying users one by one on the display
has been selected on the panel.
* As a Door Release message, replacing the default message if the option has been selected on
the panel.
-
Block.
Block where the lift is located.
-
Floor.
Floor where the home (monitor) is located.
-
Unit.
Home (monitor) number
-
Call code.
Call code (this can be left empty).
-
Relay for PIN.
Relay that is activated when the PIN code associated to that user is entered on the panel.
-
Proximity card.
Tenant's card.
-
Proximity relay.
Relay that is activated when the proximity card is passed over the panel associated to
that user. In Relay 1, relay 1 is activated. In Relay 2 relay 2 is activated and in Relay 3 relays 1 and 2
are activated.
-
Group.
A certain group, to enable users to access the fl oors defi ned in it as well as their own.
-
Telephone no.
Tenant's telephone number. For text message notifi cations, only if the PC is fi tted with
a GSM module.
Press
Add
to open a screen where
the
parameters
in Address Book are defi ned.
Press Add
