Page 62
VIVO Monitor
VIVO Monitor
2.14 ALARMS
The Vivo monitor can manage a Fermax proprietary alarm through a Sensor Module.
The monitor can communicate with and confi gure the Sensor Module and change the alarm
mode to different statuses. The screen displays the current status of the alarm system via an
LED and an icon in the Start Menu. When the Sensor Module receives an alarm activation
from one of its sensors, this is transmitted to the monitor and the monitor triggers the alarm
and communicates with the Property Management Station (Guard Unit) Alarm if necessary.
OUT mode
HOME mode
NIGHT mode
2.14.1 Alarm Management
SOS
Out
Night
Home
Alarm mode confi guration LED indicator
The Vivo monitor can manage a Fermax proprietary alarm through its Sensor Module. This Sensor Module
allows for the management of up to 16 zones. This module can also be managed in parallel using D16
keypads and, therefore, the visual status of the Sensor Module can be monitored by both units.
The monitor communicates with the Sensor Module over a proprietary protocol via an RS-485 interface. A
maximum of 4 Sensor Modules and, therefore, a total of 64 zones can be managed.
To do so, press
General Settings
to access the screen where the
Installation Settings
option is located
(press)
,
enter the
installer PIN
code, which by default is
4444
and press
OK
to access the screen where
the
Alarm Settings
option is located. This is where the different Sensor Modules and their parameters
can be confi gured.
