Page 6
VIVO Monitor
VIVO Monitor
Introduction
The VIVO Monitor is an Internet Protocol-based monitor. This monitor is part of the LYNX system: TCP / IP
PoE-based multi-channel data, audio and video. It communicates with a panel based on an IP video-door
(the LYNX Audio and Video module) and with a PC-based Guard Unit (the Property Management Station,
PMS).
The VIVO monitor is hands-free, with duplex audio, colour video with 7" touch screen and additional
capacitive buttons for the most common functions.
A technological monitor designed to maximise communication, security and comfort in the home. The
monitor is wall-mounted using the VIVO LYNX Connector (Ref. 1605).
VIVO MONITOR
Description of Functional Features: Buttons and Icons
When switched on, the monitor starts up and displays the FERMAX logo, the fi rmware version and the
MAC address. The start-up process takes less than 60 seconds and the monitor enters stand-by mode.
The fi rmware version is also indicated in the Installer Settings screen.
SOS
Do Not Disturb mode
Door open
Message notifi cation
Out
Night
Home
Alarm confi guration modes
Panic Button
MENU Button
Touch screen
When a new VIVO monitor with a more recent fi rmware
version is connected to an existing installation, all the
current monitors already installed will be automatically
updated to this new version.
The screen is switched off when the monitor is on
stand-by. To access any of the basic functions, press
the MENU button or touch the screen to activate and
select the icon for the required function.
Six LED icons can be displayed at the top of the
monitor frame. These icons are only visible when the
LED is switched on.
