Page 47
VIVO Monitor
VIVO Monitor
SOS
Once confi rm has been pressed, Do Not Disturb mode is enabled, the
Do Not Disturb LED
is lit and the
Do Not Disturb
icon on the start screen changes to indicate that the mode is activated.
This mode is reset after the programmed period has expired or when the
Do Not Disturb
icon on the start
screen is pressed. On disabling the mode, the
Do Not Disturb LED
also switches off.
Notes:
- If Do Not Disturb mode is enabled and the monitor is reset or switched off (no power), it is disabled.
- The message reception tone is not deactivated when Do Not Disturb mode is enabled. This tone can
be disabled in the option: 2.16 General Settings / 2.16.1 Call Settings / Beep for message received.
2.2 OUTDOOR PANEL
Function to make calls/connection to outdoor panels and IP cameras.
When the Panel icon is pressed, the
Name
of all the panels available is displayed (
Name:
the description defi ned in each one of them).
Explained in Chapter: 1.2.1 Call/connection
to outdoor panel.
2.3 PROPERTY MANAGEMENT STATION PMS (Guard Unit)
Function for making calls to the Property Management Station or Stations PMS (Guard Unit)
When the PMS icon is pressed, the
Name
of all Property Management Stations is displayed
(
Name:
the description defi ned in each one of them).
Explained in Chapter: 1.2.2 Calling the Property Management Station PMS (Guard Unit).
2.4 INTERNAL CALL (Monitor selection)
:
Call from one monitor to another installed in the same home
Function to call from one monitor to another installed in the same home.
To call another room in the same home, press the
Internal Call (Monitor selection)
icon.
A list will be displayed that contains all the monitors available. Select the required monitor
and the call is automatically sent.
Explained in Chapter: 1.2.4 Inter-Communication: Calls between monitors / 1.2.4.1
Internal Call: Call from one monitor to another installed in the same home.
