Page 69
VIVO Monitor
VIVO Monitor
Once all of the parameters are defi ned, press Save.
Lift Settings - Table a.
Press
Add
to open a screen where the data for control of a new lift must be entered.
The parameters in Lift Settings are:
-
Tag.
Lift description.
-
Block.
Block where the lift is located.
-
Lift.
Master relay module number corresponding to this lift.
-
Panels.
Number of the panel or panels of this block that allow access to that lift. Example: 1, 2, 3.
-
Start Floor.
Starting fl oor of the lift's run.
-
End Floor.
Ending fl oor of the lift's run.
-
Visitor's time.
This is the time that visitors have to reach the lift from the moment any tenant opens the
door at the access allowing entry.
-
Tenant's time.
This is the time that residents have to reach the lift from the moment the corresponding
access is activated.
