Page 98
VIVO Monitor
VIVO Monitor
4. Connectors
Monitor connection.
- 30 pins to attach to the monitor connector.
- Mini USB (internal) for fi rmware (during start-up).
- Connector for the SD card.
Connections:
-
RJ-45
10/100 Base -T Ethernet, socket powered. RJ-45.
-
NG, P:
To connect an external secondary SOS button (dry contact).
-
NG, B:
To connect a button for the Door Bell.
Note: When the Door Bell is pressed, the melody selected for this call will be played. The monitor screen
is not activated. If the Door Bell is pressed during a conversation, the melody is not heard but a message
is displayed on the screen.
-
D1, D2:
RS-485 serial port for communications with another future system.
-
A1, A2:
RS-485 serial port for communications with the alarm system.
-
+, - :
12 Vdc power supply (if a PoE switch is not used).
-
1, 2, 3, 4, 6, V, M, Ct:
To connect an analogue panel (4+N).
Note: Calls can also be received from an analogue video panel in the home (4 + N, one line). In this case,
the analogue panel is connected to the pins reserved for this connection. The call reception process is
the same as in the normal case, with the following limitations:
- If there is more than one monitor in the home, only the monitor directly connected can receive the call.
- Only one Relay can be opened.
- Automatic On (Camera ON) is not possible on the monitor. The video is only activated when the call
is made from the Panel.
Monitor connector.
