Page 86
VIVO Monitor
VIVO Monitor
The monitors are identifi ed by 2 labels:
-
Tenant Name:
This identifi es the home (e.g. the Garcia family, name Marta Jover, etc.).
Note: All monitors in the same home must have the same Name, Block and Unit.
-
Monitor Tag:
This describes its location (i.e. dining room, kitchen, bedroom, etc.). Each monitor has a
different tag. Given that up to 8 monitors can be installed in each home, the extension numbers are: 0...7.
To complete these labels:
Tenant Name
and
Monitor Tag,
go to
Home to Home Call Settings.
To do so,
press
General Settings
and then
Home to Home Call Settings.
When one of the labels is pressed, a cursor and a key-
board are displayed so that the data can be entered.
This screen also displays the following options:
- Allow All Incoming Calls
- Only allow incoming calls from Friends List. See Chapter: 1.2.4.2 External Call/Contacts List/
Friendship Request.
- Note: To go back to the Start Menu, press the intui-
tive icons displayed on the monitor - such as arrows
or icons corresponding to the current screen - by
pressing the MENU button or after a period of time,
as the monitor returns to stand-by (screen off) after
30 seconds.
