Page 89
VIVO Monitor
VIVO Monitor
From the Start Menu, press the
Lift Control
icon to send the lift to the fl oor where the user lives (for a pre-
set period of time). Up to 3 Relays can be activated when this icon is pressed (depends on the installation/
confi guration provided by the installer, parameters defi ned in the
Lift Control Settings
option). The Relay
must be in the same Block as the monitor. The monitor screen indicates that the action has been carried out.
Note:
Relay modules are installed in groups (groups of relays) and each group has:
• Master IP relay module: 4 Relays.
• 0 or more RS-485 slave modules: up to 32 modules, each one with 10 relays.
• Power Supply (at least 1, the number depends on the number of slave modules).
Each group of relays controls a lift and each group of relays has a unique IP address.
Each IP module can manage 4 Relays. Each slave module can manage 10 Relays. Hence, a Group can
manage from 4 to 324 Relays (i.e. over 320 fl oors).
The following fi elds are required for Relay confi guration: Group, Module and Relay.
Press Confi rm to save the parameters
2.16.8.4 Optional Functions
The
Optional Functions
function enables the installer to activate the icons that are not
available by default (available monitor options). This function can be used by the installer to
enable/disable the options available on the monitor.
Functions enabled
by default
Press the functions for them to go from the Disabled
window to the Enabled window and vice versa.
