Page 43
Notes:
- The time and mode (timer/Continued), confi gured in the relay transmitter does not effect
the receptor relay.
- Local mode (transmitter relay - relay on):
* SET ON -> Activates relay.
* RESET ON -> Deactivates relay.
- Continued mode:
Remote Relay Activation:
* SET ON -> Activates remote relay.
* SET OFF
RESET ON
Remote Relay deactivation.
3.3.1.5 ACTIVATE OR DEACTIVATE THE F2 RELAY FUNCTION
Function description.
* First operating mode:
You can activate or deactivate a second remote relay confi gured as F2 by activating the
Set terminal (button connected between the SET and - terminals), in the relay that we are
confi guring.
For this, the second relay must be confi gured as described in section:
3.3.2 RX Operating
Mode,
section:
3.3.2.6 ACTIVATING RELAY UPON RECEIVING ACTIVATE F2 RELAY
COMMAND.
If the relay we are confi guring activates the Reset terminal (button connected between the
RESET and - terminals), the remote relay confi gured as F2 is deactivated.
TX
RX
3257
REF.
DISABLE
OUTPUT
12V 0.3A
SEC SINGLE
MIN ALL
OUT
NO
NC
C
RELAY
AV TRES CRUCES, 133
FERMAX ELECTRONICA, SAU
46017 VALENCIA - SPAIN
MADE IN SPAIN
BUS
OUTPUT
C
D
T
RX
PRG
MODULO RELE
DUOX
DUOX RELAY
MODULE
BUS INPUT
B
B
PRG
TX
B B
+12V
-
RESET/
SET
V
ON
3257
REF.
DISABLE
OUTPUT
12V 0.3A
SEC SINGLE
MIN ALL
OUT
NO
NC
C
RELAY
AV TRES CRUCES, 133
FERMAX ELECTRONICA, SAU
46017 VALENCIA - SPAIN
MADE IN SPAIN
BUS
OUTPUT
C
D
T
RX
PRG
MODULO RELE
DUOX
DUOX RELAY
MODULE
BUS INPUT
B
B
PRG
TX
B B
+12V
-
RESET/
SET
V
ON
DESTINATION
receptor relay
ORIGIN
transmitter relay
(confi gured as Activa-
tion or Deactivation
upon RECEIVING
an Activate F2 relay
command.
second
REMOTE relay
(the one being con-
fi gured as SEND of
the Activation or De-
activation command
on the F2 relay)
fi rst relay
* Second operating mode:
Continued Mode (TOGGLE). If a relay in charge of activating the second remote relay
we activate Continued mode
(see:
3.2 CONFIGURATION OF ACTIVATION TIMES
,
upon
activating the Set terminal on the fi rst relay, the second remote relay confi gured as F2 is
activated, and if the Set terminal is deactivated or the Reset terminal on the fi rst relay is
activated, the second remote F2 relay is deactivated.
