Page 39
3.3 FUNCTIONS DEPENDING ON OPERATING MODE
3.3.1 TX Operating Mode
-The mode where the relay sends commands to other devices depending on the confi gured
command (in this mode, the relay does not activate the output).
-
To access this mode confi gure the bridge to
TX
mode.
FUNCTIONS:
- Lock-release function after receiving a call.
- Lock-release function to a confi gured panel.
- Guard-unit call function.
- F1 relay activation or deactivation function.
- F2 relay activation or deactivation function.
- Remote relay activation or deactivation function.
- Doormatic function.
FUNCTIONS
3.3.1.1 LOCK-RELEASE FUNCTION UPON RECEIVING A CALL
Function description.
You can associate the duox relay to a house so that upon calling a home you have 30 sec-
onds, via activation of the Set terminal (button connected between the SET terminals and -)
for the Lock-release command to be sent to the panel that last made the call. This way the
user does not have to go to the house´s terminal to press the lock-release button.
Function confi guration.
1. Press the
On/Off
button, the display will show the
Duox Relay
and
version.
2. Via the arrows we select the
1. COMMAND
menu and press
Ok.
3. Via the arrows we select the
DOOR OPENING
command and press
Ok.
4. Via the arrows we select the
2. PANELS
menu and press
Ok.
5. Via the arrows we select
ALL
and press
Ok.
6. Via the arrows we select the
3. TERMINALS
menu and press
Ok.
7. Via the arrows we select
LIST
and press
Ok.
8. Via the arrows we select the
3.2. TERM LIST
menu and press
Ok.
9. Via the arrows we select
ADD
and press
Ok.
10. Via the number buttons we enter the
address
of the telephone we want to assign to the
function and press
Ok.
Note:
If you want to view the value entered for the address, select 3.2 TERM LIST and press
Ok. Via the arrows we select LIST and press Ok.
11. Upon turning the programmer off, the function remains activated.
