Page 53
Function confi guration.
First step: Confi gure the command and panel.
1. Press the
On/Off
button, the display will show the
Duox Relay
and
version.
2. Via the arrows we select the
1. COMMAND
menu and press
Ok.
3. Via the arrows we select the
PANEL CALL
command and press
Ok.
4. Via the arrows we select the
2. PANELS
menu and press
Ok.
5. Via the arrows we select
ALL
and press
Ok.
6.
a) If we want the relay to activate with the call to residence command from
all panels
with
the arrows we select
ALL
and press
Ok.
a) If we want the relay to activate with the Call to residence command from one specifi c
panel
with the arrows we select
ONE
and press
Ok.
With the arrows we select the type of
panel
we want to confi gure (Block Panel, Sub-
block Panel or general entrance panel) .
Note:
Depending on the type of panel selected, a different menu is displayed.
7. Via the number buttons we enter the
address
of the panel we want to confi gure and press
Ok.
Second step: Confi guration of the command´s destination (residence terminals).
The call to residence command, relative to the
residence terminals
receiving them can be
confi gured as:
a) All installed terminals (ALL).
b) Terminals from a list (maximum 100 terminals).
c) Terminals included within a defi ned range (consecutive).
a) Confi guration: All installed terminals (ALL).
1. Via the arrows we select the
3. TERMINALS
menu and press
Ok.
2. Via the arrows we select
ALL
and press
Ok.
3. Upon turning the programmer off, the function is confi gured.
b) Confi guration: Terminals in a list (maximum 100 terminals).
1. Via the arrows we select the
3. TERMINALS
menu and press
Ok.
2. Via the arrows we select
LIST
and press
Ok.
3. Via the arrows we select the
3.2. TERM LIST
menu and press
Ok.
4. Via the arrows we select
ADD
and press
Ok.
5. Via the number buttons we enter the
address
of the telephone we want to add and press
Ok.
Notes:
- If you want to view the value entered for the address, select the 3.2 TERM LIST menu
and press Ok. Via the arrows we select LIST and press Ok.
- If we want to delete a terminal from the list, select the 3.2 TERM LIST menu. Via the
arrows we select ERASE and press Ok. Via the arrows, select the terminal to delete
and press Ok.
6. Upon turning the programmer off, the function is confi gured.
Note:
- When the list is complete (100 terminals), the Relay On led fl ashes quickly.
