background image

Page 50 

Function confi guration.

First step: Confi gure the command and panel.

1.  Press the 

On/Off

 button, the display will show the

 Duox Relay

 and 

version.

2.  Via the arrows we select the 

1. COMMAND

 menu and press 

Ok.

3.  Via the arrows we select the 

DOOR OPENING

 command and press 

Ok.

4.  Via the arrows we select the 

2. PANELS

 menu and press 

Ok.

5.  Via the arrows we select 

ALL

 and press 

Ok.

6. 

a) If we want the relay to activate with the Lock-release command with the destination 

being

all panels

 with the arrows we select

ALL

 and press 

Ok.

    a) If we want the relay to activate with the Lock-release command with the destination being 

a specifi c 

panel

 with the arrows we select

ONE

 and press 

Ok.

With the arrows we select the type of 

panel

 we want to confi gure (Block Panel, Sub-

block Panel or general entrance panel) and press Ok.

Note:
Depending on the type of panel selected, a different menu is displayed. 

7. Via the number buttons we enter the 

address

 of the panel we want to confi gure and press  

Ok.

Second step: Confi guration of the command´s origin (residence terminals).

The lock-release command, relative to the 

residence terminals

 sending them can be con-

fi gured as:

a) All installed terminals (ALL).
b) Terminals from a list (maximum 100 terminals).
c) Terminals included within a defi ned range (consecutive).

a) Confi guration: All installed terminals (ALL).

1.  Via the arrows we select the 

3. TERMINALS

 menu and press 

Ok.

2.  Via the arrows we select 

ALL

 and press 

Ok.

3.   Upon turning the programmer off, the function is confi gured.

b) Confi guration: Terminals in a list (maximum 100 terminals).

1.  Via the arrows we select the 

3. TERMINALS

 menu and press 

Ok.

2.  Via the arrows we select 

LIST

 and press 

Ok.

3.  Via the arrows we select the 

3.2. TERM LIST

 menu and press 

Ok.

4.  Via the arrows we select 

ADD

 and press 

Ok.

5.  Via the number buttons we enter the 

address

 of the terminal we want to add and press  

Ok.

Notes:
- If you want to view the value entered for the address, select the 3.2 TERM LIST menu 

and press  Ok. Via the arrows we select LIST and press Ok.

- If we want to delete a terminal from the list, select the 3.2 TERM LIST menu. Via the 

arrows we select  ERASE

  

 and press Ok. Via the arrows, select the terminal to delete 

and press Ok.

 

6.   Upon turning the programmer off, the function is confi gured.

Note:
- When the list is complete (100 terminals), the Relay On led fl ashes quickly.

Summary of Contents for DUOX RELAY





































































Reviews: