Page 17
2.5.1.7
DOORMATIC
FUNCTION
Function description.
You can add the Doormatic function to a device that does not have it,
(ex. the Loft Duox Basic
Telephone).
When the relay receives the Normal Call command to the confi gured home, after
5 seconds, it sends the Lock-release command to the last panel that made the call.
Function confi guration.
1.
Press the
PRG
button, the
C
led should light up.
2.
Press the
Min/All
button, the
C
LED should blink quickly.
3.
Make a call to any telephone from a street panel, the led
C
must remain off. This way, the
command is confi gured on the relay being serviced, now you must confi gure the terminal
to include the Doormatic function on.
4.
Press the
PRG
button twice, the
D
led should light up.
5.
Press the
Sec/Single
button, the
D
LED should blink quickly.
6.
Make a call to the terminal you want to have the Doormatic function. Upon making the call
the
Relay On
led turns on for about 1.5 seconds.
7.
Press the
PRG
button, all the leds must remain off. The function has been confi gured so
that when you make a call to the confi gured telephone, after 5 seconds the Lock-release
is activated.
Steps to change the terminal assigned the Doormatic function.
1.
Press the
PRG
button twice, the
D
led should light up.
2.
Simultaneously press the
Min/All
and
SEC/SINGLE
, the
D
led should remain off.
3. Repeat points 4 and 7 from the previous process.
Notes:
- This function only works with one terminal address. If you need to confi gure terminals
confi gured as “ALL,” it will not attend to any terminal address.
- In the push-button confi guration mode, if no button is pressed the relay returns to standby
and all leds turn off after 300 seconds.
Notes:
- The time and mode (timer/bi-stable), confi gured in the relay transmitter does not effect the
receptor relay.
- Local mode (transmitter relay - relay on):
* SET ON -> Activates relay.
* RESET ON -> Deactivates relay.
- Bi-stable mode:
Remote Relay Activation:
* SET ON -> Activates remote relay.
* SET OFF
RESET ON
Remote Relay deactivation: