Page 33
a) F2 transmitted by a phone
The residence terminals must have an F2 button (or default function) to send the F2 com-
mand,
(for example, the loft duox extra phone)
.
Upon pressing the F2 button on the telephone, the F2 command is sent. The relay, if confi g-
ured this way, can be activated upon receiving the command.
2.5.2.6 ACTIVATING OR DEACTIVATING THE RELAY UPON RECEIVING AN ACTIVATE
F2 RELAY COMMAND
Function description.
You can confi gure the relay to activate or deactivate upon receiving the activate or deactivate
the F1
relay command:
a) Transmitted by a phone or
b) Transmitted by a duox relay confi gured as explained in section:
2.5.1. TX Operating mode,
section 2.5.1.5 ACTIVATE OR DEACTIVATE THE F2 RELAY FUNCTION.
TX
RX
3257
REF.
DISABLE
OUTPUT
12V 0.3A
SEC SINGLE
MIN ALL
OUT
NO
NC
C
RELAY
AV TRES CRUCES, 133
FERMAX ELECTRONICA, SAU
46017 VALENCIA - SPAIN
MADE IN SPAIN
BUS
OUTPUT
C
D
T
RX
PRG
MODULO RELE
DUOX
DUOX RELAY
MODULE
BUS INPUT
B
B
PRG
TX
B B
+12V
-
RESET/
SET
V
ON
3257
REF.
DISABLE
OUTPUT
12V 0.3A
SEC SINGLE
MIN ALL
OUT
NO
NC
C
RELAY
AV TRES CRUCES, 133
FERMAX ELECTRONICA, SAU
46017 VALENCIA - SPAIN
MADE IN SPAIN
BUS
OUTPUT
C
D
T
RX
PRG
MODULO RELE
DUOX
DUOX RELAY
MODULE
BUS INPUT
B
B
PRG
TX
B B
+12V
-
RESET/
SET
V
ON
DESTINATION
receptor relay
ORIGIN
transmitter relay
(confi gured as Activa-
tion or Deactivation
upon RECEIVING
an Activate F2 relay
command.
(the relay being
confi gured as SEND
of the Activation
or Deactivation
command on the F2
relay)
Relay confi gured
as SEND F2
Relay confi gured as acti-
vation/deactivation upon
RECEIVING F2
- The F2 command, relative to the
residence terminals
sending them can be confi gured as:
* All installed terminals (ALL).
* Terminals from a list (maximum 100 terminals).
* Terminals included within a defi ned range (consecutive).
