8 Operation in general
61
8.2.2 Sensor selection
If the sensor which was last used has been exchanged for a different
sensor or several sensors are perhaps connected to one side at the
same time, the sensor desired for the relevant operation can be
selected in "Sensor selection".
Sensor selection is only available in "manual" operating mode.
The active sensor is changed as follows:
Call-up:
Press function button F1 (
) in the operating
window.
The sensor selection window opens.
The symbol appears at the top left of the
window.
c m
12. 3
9. 8
2. 40%
6
Select another sensor using the up/down buttons.
If more sensors than fit in the display are
connected, the system automatically scrolls
forwards.
The selection has a black background.
Confirm the selection with the enter button.
