6 Controls and displays, operating modes
49
6.6 Special levelling system functions
6.6.1 Direct menu changeover
Definition
Levelling system operation is usually required during paving.
If the remote control is not set to the operating window for the levelling
system, the currently displayed menu must first be ended by pressing
button F3.
Alternatively, a 2nd variant is available for switching the display to the
levelling system operating window.
By pressing any levelling system button assigned to the side, the
display immediately switches to the levelling system menu.
Precondition
This type of direct switching to the levelling system menu only functions
in the case of one of the following menus:
Auger
Conveyor
Lateral slope display
Layer thickness display
If the remote control is set to the one of the specified menus, the
display is switched to the levelling system operating window by
pressing any levelling system button.
%
44
12
%
44
12
c m
11. 2
E.g. direct return in the case of the left remote control.
