8 Operation in general
65
8.5 Auger menu
Different operating modes are available for the auger drive's control
system.
The Screed Control System described in these instructions uses a material
sensor to determine the distance from the material and monitors all button
operations on the corresponding keypad block.
These two sets of information are transmitted to the higher-level control
system, where they are processed. Overall control in the various modes is
also carried out by this higher-level system.
The various modes will nevertheless be described in the following.
8.5.1 MANUAL control system
Resting
function
Button
function
Display
In this mode, the auger is actuated at full speed.
The manual button has 2 functions:
Turning the manual button briefly activates the mode.
A green function LED integrated in the button shows the user that this
mode is currently active.
Activating the manual mode also terminates any hitherto active
automatic mode.
The manual button is pressed again for deactivation.
Activation of the AUTO mode also ends manual mode.
If the manual button is pressed and held, the auger only runs for as long
as the button is held. If the button is released again, the auger stops
automatically.
The manual mode does not need its own separate display message.
