22
2 Basic safety instructions
Inadequate securing
WARNING!
Risk of injury due to inadequate securing!
Inadequate securing of the construction site and the location of a
component, e.g. the laser transmitter, may lead to hazardous situations in
road traffic and on the construction site.
Therefore:
Ensure that the construction site is adequately secured.
Ensure that the locations of the individual components
are adequately secured.
Observe the country-specific, applicable safety and
accident prevention regulations and the valid road traffic
regulations.
Incorrect measurement results
CAUTION!
Danger due to incorrect measurement results!
Incorrect measurement results caused by using a product which has been
dropped, any other impermissible stress or a modification may lead to
significant material damage.
Therefore:
Do not use products which are obviously damaged.
Before reusing a component which has been dropped,
carry out a control measurement.
2.8 Safety facility
The remote control is equipped with a separate, higher-level safety facility
in the form of an emergency off switch.
Integration of this emergency off switch lies in the area of responsibility of
the vehicle manufacturer and is urgently recommended.
The remote control is additionally equipped with a defined CAN
command, via which external intervention into the control system can be
achieved. This command can be used to shut off the calculation of a
control variance.
In the event of a fault, all of the LED arrow's LEDs on the remote control
additionally flash, thereby drawing the operator's attention to a
malfunction.
