2 Basic safety instructions
15
2 Basic safety instructions
General
This section provides an overview of all important safety aspects for
optimal personnel protection and for safe and trouble-free operation.
The instructions are intended to enable the owner and user to
recognise any usage hazards in good time and to avoid these in
advance wherever possible.
The owner must ensure that all users understand and comply with
these instructions.
2.1 Intended use
2.1.1 Proper use
The Dynapac Screed Control System has been designed and
constructed exclusively for the proper, intended use described here.
Monitoring of a reference level and/or reference slope using rotary,
laser or ultrasonic sensors.
Monitoring of the screed inclination with a slope sensor.
Monitoring of the vibration, tamper and auxiliary compactor
frequency using impulse sensors installed in the screed.
Monitoring of the screed crowning with a cable sensor.
Monitoring of the material quantity in the area of the auger using
ultrasonic material sensors.
Setting of various nominal values plus parameters for the vehicle's
hydraulic system performance.
Automatic calculation of control variances for screed levelling and
crowning adjustment, and transmission of the control variances to
a higher-level controller via the CAN bus.
Any use other than that listed here, and any application which does not
correspond to the technical data is regarded as improper and incorrect.
