20
2 Basic safety instructions
2.7 Special risks
General
The residual risks arising on the basis of the hazard analysis are
specified in the following section.
Observe the safety instructions listed here and the warnings in the other
chapters of these operating instructions in order to reduce health risks
and avoid hazardous situations.
Electrical current
DANGER!
Danger due to electrical current!
When working with the laser mast or the power mast in the immediate
vicinity of electrical systems, e.g. overhead cables or electric railways, a
life-threatening risk exists due to electric shock.
Therefore:
Maintain a sufficient safety distance away from electrical
systems.
If working in such systems is vitally necessary, inform the
departments or authorities responsible for these systems
prior to carrying out this work and follow their
instructions.
Moving components
CAUTION!
Risk of injury due to moving vehicle parts!
During screed control and regulation, vehicle parts and assembles are
moved manually or automatically. Rotating vehicle components and
assemblies and/or those which execute linear movements may lead to
severe injuries and to material damage.
Therefore:
Keep persons away from the working area of the vehicle
or the screed.
Remove objects from the working area of the vehicle or
the screed.
Do not reach into moving parts during operation.
Always switch off the system when the vehicle is
stationary.
Do not carry out any work on the sensor system when
the system is set to automatic mode.
