8 Operation in general
81
8.9 Basic screed width
This menu is used for input of the basic screed width.
If the system is equipped with screed width measurement, the width
entered here together with the two measured Vario screed widths results
in the total working width.
To proceed, first retract the screed completely and then measure the
total width (= basic screed width + extension parts)
Change values:
Change the brightness with the up/down
buttons.
Navigation in the menu:
Navigate through the user menu using
function buttons F1 ( ) and F2 ( ).
End menu:
Press function button F3 ( ) to leave the
menu.
8.10 Auger height adjustment
This menu is used to raise and lower the auger.
The left auger can be raised or lowered
using the up/down buttons of the left button
block.
The right up/down buttons are used to raise
or lower the right auger.
Navigation in the menu:
Navigate through the menu using function
buttons F1 ( ) and F2 ( ).
End menu:
Press function button F3 ( ) to leave the
menu.
m
2.50
