5 Design, system overview and function
27
5 Design, system overview and function
General
In this section, you will be familiarised with the design of the Dynapac
remote control and the basic way in which it functions.
5.1 Design
A separate regulator (remote control) and at least one relevant sensor
is required for each control circuit or side of the vehicle.
The user can compile his system individually depending on the vehicle
and application.
To do this, he simply selects a sensor which best meets the relevant
requirement from the large pool of available sensors and combines it
with the Dynapac remote control.
The CAN bus enables several sensors to be connected simultaneously
to one remote control. In this case, the operator selects the relevant,
active sensor with the aid of the software.
