6 Controls and displays, operating modes
51
Mode 0:
No cross operation is possible in this mode.
Mode 1&2:
In mode 1, it is only possible to show the display for the other side, while in mode 2 direct
operation is also possible.
As mode 1 and mode 2 differ just in this one point, the following description refers
to mode 2:
The following example describes how the
right-hand remote control remotely
controls the left-hand remote control -
cross operates it.
Cross operation in the opposite direction
is carried out in-line with this.
Switching the display over:
Left remote control
Right remote control
If, under the above described preconditions, any button on the left levelling system block is
pressed, the right remote control's display switches to the levelling system on the left-hand
side.
