8 Operation in general
59
8.2 Initial steps
The chapter entitled "Initial steps" contains information on switching the
system on and a description of sensor selection.
Before
switching on
Visually inspect the remote control, the sensors and the cables each
time before switching on.
Check all system components for obvious damage, and to ensure that
the connection cable connections are securely seated and correctly
installed.
Make sure that no persons or objects are located in the area of the
screed or other moving parts when switching on.
8.2.1 Switching on
Switch on the supply voltage.
The activation message initially appears for approx.4 seconds.
If any button is pressed during the activation message, the
version number of the software appears on the remote control
display for approx. 4 seconds.
The side recognition is then shown for approx. a further
4 seconds. The side recognition indicates the side of the
screed into which the remote control is plugged.
If any button is pressed during the activation message, the
version number of the software appears on the remote control
display for approx. 4 seconds.
