8 Operation in general
67
8.5.3 AUTO control system without material sensor
Function
Switching on
Display
Switching off
If no material sensor is connected, AUTO mode has a slightly different
function.
In this case, the auger always rotates at a constant speed.
This speed can be adjusted via the nominal value.
This mode is activated by pressing the auto button.
The green function LED integrated into the button indicates to the user
that this mode is currently active.
Activation of the AUTO mode additionally ends any MANUAL mode
which may previously have been active.
The nominal value can be changed using the "+" and "-" buttons.
The display only switches automatically to the auger window when the
+/- buttons are pressed.
When the AUTO button is pressed, no display appears.
%
50
---
Menu symbol
Operating mode
Sensor measured value is not present
Nominal value
F3 ends the display
The AUTO button is pressed again for deactivation.
Activation of MANUAL mode also ends AUTO mode.
The green function LED in the button is off.
