FALK Navigator 10, User Manual

Page: 43 / 121

You can also save your current position as a favourite. To do so, select the Save
position button in the main menu and confirm with Ok . The position is added to
your list of favourites along with the street and place name.
Editing/updating favourites
To edit a favourite, select a favourite and tap on the stylus symbol .
You can use the back or delete key (cf. Chapter 2.4.2) to change the entries.
You can delete a favourite using the X symbol .
Note : If you have set a home address using Set Home , this address can be viewed or
deleted by tapping on the Favourites button on the main menu.
Note : The Favourites and my POIs you have created can be transferred via the Falk Navi-
Manager to the Falk Community . There you can update the Favourites and give them
ratings, comments and a picture (optional), transfer them back to your PND as a Favourite
(cf. Chap. 5) and then use them within the Falk Travel Guide.
For details on how to do this, please consult Chapter 5 on the Falk Navi-Manager.
2.4.9 Rerouting
The Rerouting menu function gives you the
option of blocking sections of road for your route
calculation. This allows you to perform alternative
routing without any fuss. This is particularly
helpful, for example, if you wish to avoid
temporary sets of roadworks or unpopular routes
that you are aware of.
Furthermore, you can comfortably manage
diversions which have been taken into account
as a result of traffic jam reports (TMC) and delete them again if necessary.
You can manage all blockages which you put in place via the Rerouting manager .
Note: You can put a maximum of 20 blockages in place.
This is how you block routes:
Click on the map
Tap on Block road . You will be taken to the
map view screen showing your current position.
The map is oriented towards the north.
Select the section of road which you wish to
block by tapping on it. A road segment can
always be blocked between two side roads.
You can also select further road segments by
tapping on them. If you tap again on a section
of road you have already selected, the marking
is then cancelled.
In the adjacent window on the map view screen, the road segments and the direction in
which they are to be blocked can be displayed and amended. The direction of blocking is
entered based on the point of the compass.
You confirm the blocking by tapping on OK . Decide whether the blocking should be applied
permanently or just for the present route calculation.
User Manual Falk Navigator 10 - 43 -