the device will not switch over automatically. In this case, you can switch over
manually. To do this, select
Main menu>Public transport connection
. Tap on
Get off
.
2.4.2 Destination entry/simulation via the route planner
You can use the route planner to plan and preview routes in advance from the comfort of
your home. Not only can you display the route and travel time, but you can also simulate the
calculated route on your mobile Falk navigation device. The route planner has a similar
structure as the destination entry menu. All you need to do is enter a starting point first.
The starting point is then replaced by the current GPS position in the Destination entry
screen. To plan a route, proceed as follows.
Tap
Route planner
in the main menu.
Enter a starting address, select a
favourite
, one of your
recent destinations
, your
home
address
, a
special destination
or a
Travel Guide destination
, or enter a set of
geo-
coordinates
. Tap the
Map
symbol in order to view the address you have entered on the map
or to manually select the starting point by tapping the map.
Confirm your selection with
Accept
.
Now enter a
destination address
or select a
favourite
, one of your
recent destinations
,
your
home address
, a
special destination
or a
Travel Guide destination
, or enter a set of
geo-coordinates. Tap
Calculate
in order to start the route calculation process. Tap Back to
return to the
destination selection
screen.
Note
: The starting point and destination must not be identical.
If you have activated the Ask route options function in the settings menu, you will be given
the option of changing the route options previously selected before you actually begin
calculating the route.
However, you can cancel any changes to your route options (3 different screens) by tapping
Calculate beforehand.
Various buttons are available once the route has been calculated.
You can use the
arrow keys
to display the route sections from the starting point to the
destination in stages using a route list.
Select
Back
to exit route planning and return to the starting address entry screen.
Select the
Simulation
button in order to simulate the calculated route. Note that the
simulation proceeds more quickly than actual navigation.
Select
Navigation
to launch navigation to the destination address established during route
planning. The starting address is replaced by your current location.
To cancel a
simulation/navigation
, tap on the button
Delete Route.
This will take you back
to the main menu. Once you are back in the main menu, you can simply enter a new
destination via the destination entry screen. The current route will be replaced when a new
route is calculated.
If you do not wish to enter a destination and would prefer to switch to the
position tracking
mode instead, you should select the
Delete route
or
Delete simulation
option in the main
menu.
User Manual Falk Navigator 10
- 39 -
Summary of Contents for Navigator 10
Page 1: ......
