Page
Chapter: 2
Section:
MACHINE AND POWER CONNECTION
8
PRESET
This function can be used to preset (assign) a position value to the selected axis both
in absolute or incremental modes.
CHANGE REFERENCE
This function is used to select a new reference. Once this key is pressed, the DRO will
“wait” for the desired reference number (0 thru 9) to be entered.
Once the absolute and incremental zeros corresponding to that reference has been
recovered, the DRO will display the machine’s position with respect to the selected
Zero reference.
ASG TOOL
This function is used to indicate the way the tool dimensions affect the axes
count.
Once the corresponding key is pressed, it is possible to select the type of tool
compensation to be applied and its sign by using the
and
keys.
CHANGE TOOL
Used to select a new tool.After pressing the corresponding softkey, the DRO
“waits” for the new tool number to be entered and the
key to be press-
ed.
When working with tool compensation, the DRO will update the axes positions
adapting them to the new selected tool dimensions. These dimensions are indicated in
the tool table.
Also, the indicator for the selected tool is updated.
RAD/DIA
This function allows the display selection for the corresponding axis between radius
and diameters.
The radius display shows the actual axis count and the diameter display shows twice
that amount with a resolution double that selected for the radius display.
START-UP
Summary of Contents for VNP400
Page 1: ...FAGOR VNP400 Ref 9506 in...
